VREactive

The VREactive round flow rate control unit is designed to control initial pressure independent constant or variable flow rate.

VRE-ACTIVE

The round flow rate control unit VREactive is designed to control an initial pressure-independent constant or variable flow rate. Complete shut-off is also possible.

Depending on the model size and flow rate, the minimum initial pressure difference is approx. 5 Pa ... approx. 50 Pa, based on duct air speeds of 1...10m/s.

The casing is provided with plug-in end pieces with lip-seal gasket to fit lock-seam spiral wound air ducts according to DIN EN 1506. All components are factory-wired and hose-­connected.

For sound and heat insulation, a 50mm mineral wool insulating shell with sheet steel jacket is available.

  • Complete shut off is also possible.
  • Short housing of galvanised sheet steel.
  • Minimum initial pressure is approx. 5 Pa to approx. 150 Pa (size dependent)
  • Flow rate range of 1 to 10 m/s duct velocity
  • Maintains flow rate regardless of changes in pressure (up to 800 Pa. depending on size)
  • Blade with EPDM sealing, low leakage meeting DIN EN 1751 Class 3 requirements
  • Form-fitting damper axle of galvanized precision steel according to DIN 1652
  • Low-friction, maintenance-free co-polymer dampers
  • Differential pressure measurement in the damper blade area on two cup-shaped elements

Alternative Products

Need assistance or ready to schedule a consultation? Our expert team is standing by to help you.

Top